Crystallization construction operation of terrazzo floor tiles
The structure of the crystallization process of terrazzo floor tiles through operation:
1. Construction process: Surface cleaning of terrazzo floor * Completion of overall terrazzo floor polishing gap 6-7 * Dry ground crystallization treatment (K2, K3 solution) * Whole surface solidification treatment (K1 solution) * Ground cleaning protection.
2. Complete surface cleaning of terrazzo floor: Before the crystallization treatment of the terrazzo floor, the overall surface of the paving is smooth and without color difference, and the marble diagonal is washed between each block.
3. Next step of the gap: Use a special sewing machine to open the middle seam of the original terrazzo terrazzo installation and readjust the cutting seam. The width of the gap has become almost the same, and then close the colored terrazzo marble glue they fill in (note: if the joint venture has already completed treatment before, there is no need to open the seam again).
4. Clean the entire ground: Use a dry mop to clean the ground without sand or impurities.
5. Repair of cracks with terrazzo marble adhesive: After the overall cleaning of the terrazzo surface is completed, the above minor repair points with terrazzo marble adhesive will be repaired and damaged with the original colored terrazzo floor tile adhesive near the first surface.
